Raw data stored on the CDS HCP156 project repository:

Replotted Figure 2 of the CFD4NRS-7 paper. The right hand side of Figure 2 is not presented, which is a scan of temperature isolines the Figure 4 of the Voller and Prakash (1987). The data was extracted as described below.

Contours of liquid fraction are presented without the temperature isolines from the simulations performed for the Nuclear Engineering and Design paper.

Data/Code_Saturne/V_5.0_SCDDELL14/SquareCavity_PhaseChange
Data/Code_Saturne/V_5.0_SCDDELL14/SquareCavity_PhaseChange/M320xM320_ep010/RESU/Resu15_Const02



WebPlotDigitizer was used to extract data points from Figure 4 of V. R. Voller and C. Prakash, "A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems", International journal of heat and mass transfer 30(8), 1709-1719, 1987. The data for the points at positive epsilon and negative epsilon were placed in the file pixeldataepsilon_voller.txt

Current url to: https://automeris.io/WebPlotDigitizer/
Image extraction with automatic pixel identication was selected. The averaging window was 3 by 3 pixels and the colour was matched to the contour lines.
Gimp was used to remove shaded regions introduced by scanning the figure.


