
Raw data stored on the CDS HCP156 project repository:

The contour plots were obtained from simulations performed after the final version of the CFD4NRS-7 paper was submitted.

Similar simulations were performed for the NUTHOS-12 paper. In this case the wall is 10 cm thick compared to 2 cm for the figures in these plots. The thicker walls meant that the 10cm wall could not be applied to whole of both the inlet and outlet duct.

Solid mesh 34k mesh with 10 microns (exponential)
Fluid mesh 102k mesh with 10 microns (hyperbolic)
Data/Code_Saturne/V_5.0_CIRRUS/TWO_D/INTEL/CHT/MSFR2D_nonbtvpFv2fIH_noHEX_FW_135kmesh01micronnickelwall_06



